跳至主要内容

ASME SA333 Gr.6 Seamless Steel Pipe







ASTM A333 Standard covers seamless and welded steel pipe for low temperature service. The Grade 6 steel involved is similar to AISI 4032 low alloy steel. ASTM A333 Grade 6 pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation.
Seamless and Welded Steel Pipe size for Low-Temperature Service:
  • Outer Dimensions: 19.05mm-114.3mm
  • Wall Thickness:2.0mm-14 mm
  • Length: max 16000mm
Application: Seamless and Welded Steel Pipe for Low-Temperature Service.
Steel grade: ASTM A333 Grade 6
Inspection and Test:
  • Chemical Composition Inspection, Mechanical Properties Test
  • Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test
  • Surface and Dimension Test,No-destructive Test, Hydrostatic Test.
ASTM A333 Gr. 6 Chemical Compositions(%)
ElementsComposition, %
Carbon(max)0.3
Silicon≥0.10
Manganese0.29-1.06
Phosphorus(max)0.025
Sulfur(max)0.025
Chromium —
Nickel
Copper —
Molybdenum —
Vanadium —
Aluminum —
ASTM A333 Gr.6 Mechanical Properties
 Data
ASTM A333 Grade 6
Tensile strength, min, psi (MPa)
60 000 (415)
Yield strength, min, psi (MPa)
35 000 (240)

Impact temperature

Minimum Impact Test Temperature -45 C(-50 F)

Impact requirements

 SizeMinimum Average Notched Bar Impact Value of Each Set of Three SpecimensMinimum Notched Bar Impact Value of One Specimen Only of a Set
Size of Specimen, mm
ft-lbf
J
ft-lbf
J
10 by 10
13
18
10
14
10 by 7.5
10
14
8
11
10 by 6.67
9
12
7
9
10 by 5
7
9
5
7
10 by 3.33
5
7
3
4
10 by 2.5
4
5
3
4
Straight line interpolation for intermediate values is permitted.

Impact temperature reduction

Specimen Width Along Notch or Actual Material Thickness mmTemperature Reduction,Degrees Colder C
10 (standard size)0
90
80
7.5 (3/4 standard size)3
74
6.67 (2/3 standard size)5
68
5 (1/2 standard size)11
417
3.33 (1/3 standard size)19
322
2.5 (1/4 standard size)28

P Number/ Group Number

ASTM A333
Grade 6
P Number
1
Group
1
Machinability
Machinability is good, similar to law alloy 4032 steel.
Forming
The product comes in piping form but may be formed readily by conventional methods.
Welding
Weldable by conventional methods.
Heat Treatment
Product is supplied in the normalized, 1500 f and air cooled, condition. It may be quenched and tempered by heating to 1475 F, quench in circulating water and then temper by re-heating to 1100 F and rapid air cooling.
Forging
Product is supplied in pipe form and not normally forged from that shape.
Hot Working
Hot working may be done qt 2000 F down to 1600 F if need be. Do not hot work below 1550 F and immediately following hot working cool in a controlled atmosphere furnace from a temperature above 1550 F.
Cold Working
Cold working may be done by conventional methods.
Annealing
Anneal, or normalize, at 1600 F and air cool.
Strike Temperature Condition
GradeThe lowest temperature for strike test
℉℃
ASTM A333 Gr.6-150-100
Packing:
  • Packed in wooden crates, wrapped in plastic, and suitably protected for sea-worthly delivery or as requested.
  • Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
Delivery:
Pipes are supplied in hexagonal bundles or round bundles tied with steel strip.
Weight of bundle – up to 5000 kg upon request of customer.
Each bundle is furnished with three tags.

此博客中的热门博文

ASME SA210C stocks

ASME  SA 210 Grade C  Tubes  

Bi Metal Clad bend

Bimetal Clad Pipe Bend are cast with mold vanishing vacuum suction casting cladding process. Outer of straight pipe is common steel pipe, cladding realized by forming high chromium lining via centrifugal forming technique. 1. Manufacturing Process of Bimetal Clad Pipe and Bend: Bimetal Clad Pipe and Bend are cast with mold vanishing vacuum suction casting cladding process. Outer of straight pipe is common steel pipe, cladding realized by forming high chromium lining via centrifugal forming technique. Outer of bend uses hot-bending bend and lining is cast with high-chromium cast iron. Bends and other profile sections can be cladded in whole and this process has changed the traditional practice to fabricate bend and other profile sections by drawing polyline without changing flow pattern of material inside piping,greatly reducing conveyance resistance of material. 2. Advantages Compared with Traditional Wear Resistant Alloy Cast Iron, Alloy Cast Steel, General Clad Steel Pipe and Cast St...

UHMWPE wear pipe

Ultra-high molecular weight polyethylene (UHMWPE) is a new kind of engineering thermoplastics with more than 3 million viscosity-average molecular weight. Ultra-high molecular weight polyethylene pipe has superior performance over conventional HDPE pipe such as very high wear resistance, impact resistance, excellent resistance to internal pressure strength, resistance to environmental stress cracking, intrinsically self-lubricating, anti-adhesion, low temperature resistance and excellent chemical resistance. Ultra-high molecular weight polyethylene (UHMW-PE) is the role of special catalyst, polymerization of viscosity-average molecular weight greater than 2.5 million engineering thermoplastics . Ultra high molecular weight polyethylene pipe with high wear resistance, friction coefficient is extremely small , impact resistance , corrosion resistance, non-scaling , the excellent anti- pressure strength , resistance to environmental stress cracking resistance, good self-lubricating , anti...