ASTM A333 Grade 1 Seamless Steel Pipe for Low-Temperature Service

Alloy steel pipe, astm a333, ASTM A333 Grade 1, grade 1, seamless steel pipe, Seamless Steel Pipe for Low-Temperature Service, Steel pipe

ASTM A333 Grade 1 seamless and welded carbon and alloy steel pipe intended for use at low temperatures.
ASMT A333 Grade 1 seamless and welded pipes shall be treated to control their microstructure. Tensile tests, impact tests, hydrostatic tests, and nondestructive electric tests shall be made in accordance to specified requirements.
Seamless and Welded Steel Pipe size for Low-Temperature Service:

Outer Dimensions: 19.05mm-114.3mm
Wall Thickness:2.0mm-14 mm
Length: max 16000mm

Application: Seamless and Welded Steel Pipe for Low-Temperature Service.
Steel grade: ASTM A333 Grade 1
Inspection and Test:

Chemical Composition Inspection, Mechanical Properties Test
Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test
Surface and Dimension Test,No-destructive Test, Hydrostatic Test.

Packing:

Packed in wooden crates, wrapped in plastic, and suitably protected for sea-worthly delivery or as requested.
Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.

Delivery:

Pipes are supplied in hexagonal bundles or round bundles tied with steel strip.
Weight of bundle-up to 5000 kg upon request of customer.
Each bundle is furnished with three tags.

ASTM A333 Grade 1 Chemical Compositions(%)

Elements	Composition, %
Carbon(max)	0.3
Silicon	—
Manganese	0.40-1.06
Phosphorus(max)	0.025
Sulfur(max)	0.025
Chromium	—
Nickel	—
Copper	—
Molybdenum	—
Vanadium	—
Aluminum	—

ASTM A333 Grade 1 Mechanical Properties

Grade	Yield Strength (Mpa)	Tensile Strength (Mpa)	Elongation (%)
Grade.1	≥205	≥380	35

Strike Temperature Condition

Grade	The lowest temperature for strike test
Grade	℉	℃
Gr.1	-50	-45

此博客中的热门博文

ASTM A213 T11 Seamless tube

ASTM A213 , ASTM A213 T11 , boiler tube , Heat exchanger tube , heat exchanger tubes , steel tubes , Tubing ASTM A213 T11 is the part of ASTM A213 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, Heat-Exchanger Tubes. These different requirements provide higher creep-rupture strength than normally achievable in similar grades without these different requirements. ASTM A213 T11 tubes shall be made by the seamless process and shall be either hot finished or cold finished, as specified. Grade TP347HFG shall be cold finished. Heat treatment shall be done separately and in addition to heating for hot forming. The ferritic alloy and ferritic stainless steels shall be reheated. On the other hand, austenitic stainless steel tubes shall be furnished in the heat-treated condition. Alternatively, immediately after hot forming, while the temperature of the tubes is not less than the minimum solution temperature, tubes may be individually quenched i

阅读全文

Pipe for cryogenic device

Cryogenic piping refers to systems that are used in a wide range of industrial applications that require extremely low temperatures, generally around -300°F (150°C) or lower. Due to such low temperatures, cryogenic pipes face unique corrosion and deterioration challenges. Cyrogenic piping is also referred to as cold piping. Implement specifications such as ASME SA-333M, GB/T18984. The seamless steel tubes are applied for low temperature pressure vessel pipeline and low temperature heat exchanger pipeline. Usage Specification Steel Grade Seamless and Welding Nominal Pipe used for Low Temperature ASME SA -333M Gr.3, Gr.6, Gr.8 and so on Seamless Steel Pipe used for Low Temperature Pipeline GB/T18984 16MnDG, 06Ni3MoDG, 06Ni9MoDG and so on ASTM A333 (ASME S/A-333) Pipe grades permit low temperature service. Mechanical requiremnts of ASTM A333 alloy pipe Grade Tensile Strength (MPa） Yield Point (MPa) Elongation (%) Y X Grade 3 ≥450 ≥240 ≥30 ≥20 Grade 6 ≥415 ≥240 ≥30 ≥16.5 Grade 8 ≥690 ≥5

阅读全文

Ceramic Lining Pipe and Elbow

Ceramic Lining Pipe and Elbow have very uniform coating of specially formulated ceramic material that is affixed to the inner of the pipe and gives a very smooth surface. Ceramics with very low friction factor at low impingement angles decreases the abrasion of materials maximally. Its low density makes it easy to carry and install. Furthermore, its diamond-like hardness, fine grain structure and superior mechanical strength are the unique features that make it a wide range of demanding applications, such as coal preparation, power generation, iron and steelmaking, cement, asphalt, dredging, mining and mineral processing, oil and gas drilling. Metals have good ductility but poor resistance to abrasion - which means that abrasion prevention is required when metal pipes are used in high-temperature fluid catalyst service. On the other hand, ceramics possess great hardness and abrasion resistance, but they are brittle. Metal Ceramic double pipe is a hybrid pipe using metal as an outer pip

阅读全文

Alloy pipe

搜索此博客