耐磨陶瓷管道输送铸造型砂

我单位铸造车间用的型砂气力输送系统输砂管道末端非常容易磨损，想改成耐磨陶瓷管道。

将其中“通管”（外径222mm，内径205mm，长325mm）做成耐磨陶瓷管，要求内径205mm不变，不能影响法兰安装和焊接要求，陶瓷片不能脱落，否则陶瓷片随砂子落入砂库，再进入混砂机可能造成设备事故。
输送介质：铸造型砂，其中含有少量水玻璃、碱性酚醛树酯等粘接剂残留物。
温度：-20-200度。
贵公司的耐磨陶瓷管道哪一种最适合（耐磨、耐腐、耐温）？做出来价格如何？一体式的贵吗？
可以选用整体耐磨陶瓷管道，具有使用寿命长，不存在脱落的可能性，欢迎来电咨询恰谈。

此博客中的热门博文

ASTM A335 P9 Alloy Steel Pipes

ASTM A335 P9 Alloy Steel Pipes alloy steel , Alloy steel pipe , ASTM A335 , ASTM A335 p9 , Steel pipe , steel pipes ASTM A335 P9 is the part of ASTM A335, The pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements. Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested. Material & Manufacture Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below. Heat Treatment A / N+T N+T / Q+T N+T ...

阅读全文

ASTM A335 P5 Alloy Seamless Steel Pipes

ASTM A335 P5 Alloy Seamless Steel Pipes ASTM A335 , ASTM A335 P5 , ASTM A335 P5 alloy pipe , seamless steel pipes , steel pipes Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested. Material & Manufacture Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below. Heat Treatment A / N+T N+T / Q+T N+T Mechanical Tests Specified Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots...