Wear-resistant pipe

Properties of Steel Pipe

Steel Grade	Yield（MPa）	Tensile	Elongation	Hardness
Steel Grade	Yield（MPa）	（Mpa）	（%）	(HRC)
45Mn2	—	—	—	HRC≥50 Hot rolling delivery, HRC should be more than or equal to 50 after heat treatment
HS-1	—	—	—	HRC≥55 Hot rolling delivery, HRC should be more than or equal to 55 after heat treatment
65Mn	—	—	—	HRC≥58 Hot rolling delivery, HRC should be more than or equal to 58 after heat treatment
H65	—	—	—	HRC≥60 Hot rolling delivery, HRC should be more than or equal to 60 after heat treatment
NM50	≥420	≥750	≥14%	HRC≥50 HRC should be more than or equal to 50 after heat treatment
NM55	≥450	≥780	≥13%	HRC≥55 HRC should be more than or equal to 55 after heat treatment
NM60	≥530	≥880	≥12%	HRC≥60 HRC should be more than or equal to 60 after heat treatment
NM62	≥550	≥990	≥12%	HRC≥62 HRC should be more than or equal to 62 after heat treatment

Production Range

OD: 42mm-760mm
WT: 4mm-120mm

Steel Grade

Technical standard: GB/T 8162, GB/T 33966, GB/T 8163 or technical agreement.

Application Fields

It is widely applied in engineering machinery field, conveying solid materials (e.g. mud, coal, ore, sand, cement) by means of transmission media (such as liquid or gas).

此博客中的热门博文

ASTM A335 P9 Alloy Steel Pipes

ASTM A335 P9 Alloy Steel Pipes alloy steel , Alloy steel pipe , ASTM A335 , ASTM A335 p9 , Steel pipe , steel pipes ASTM A335 P9 is the part of ASTM A335, The pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements. Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested. Material & Manufacture Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below. Heat Treatment A / N+T N+T / Q+T N+T ...

阅读全文

ASTM A335 P5 Alloy Seamless Steel Pipes

ASTM A335 P5 Alloy Seamless Steel Pipes ASTM A335 , ASTM A335 P5 , ASTM A335 P5 alloy pipe , seamless steel pipes , steel pipes Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested. Material & Manufacture Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below. Heat Treatment A / N+T N+T / Q+T N+T Mechanical Tests Specified Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots...