跳至主要内容

Alloy Steel Seamless Pipes



SunnySteel is a merchant exporter and supplier of Alloy Steel Seamless Pipes, Alloy Steel Seamless tubes used for many different purposes. We are specialized in offering precision engineered alloy steels, which are used in various engineering applications and can be availed in various grades like.

CDCold Drawn SeamlessCFSCold Finished SeamlessHFSHot Finished Seamless
CDNCold Drawn, Condition NCDACold Drawn AnnealedHFHTHot Finished Heat Treated
CDHTCold Drawn Heat TreatedDOMDrawn Over Mandrel
CDSRCold Drawn Stress RelievedHRAHor Rolled Annealed

Available Specification
Alloy Steel Seamless Pipes, Alloy Steel Seamless tubes, Alloy Steel Seamless Pipe, Alloy Steel Seamless tube,  Alloy Seamless Pipes, Alloy Seamless tubes
ASTM / ASME  
Product Name
Executive Standard
Dimension (mm)
Steel Code / Steel Grade
Seamless Ferritic and Austentic Alloy Steel Boiler, Superheater and Heat-Exchanger Tubes
ASTM A213
10.3~426 x 1.0~36
T5, T9, T11, T12, T22, T91
Seamless ferritic Alloy Steel Pipes for High Temperature Use
ASTM A335
1/4"~42" x 2~120mm
P5, P9, P11, P12, P22, P91, P92
Seamless Carbon and Alloy Steel for Mechanical Tubing
ASTM A519
16"~42" x 10~100mm
4130, 4130X, 4140
EN  
Product Name
Executive Standard
Dimension (mm)
Steel Code / Steel Grade
Seamless Ferritic Alloy Steel Pipes for High Temperature Use
EN 10216-2
8"~42" x 15~100mm
13CrMo4-5, 1-CrMo9-10, X10CrMoVNb9-1, 
15NiCuMoNb5-6-4

Any questions, that will be much appreciated! Thanks

Yours Sum Xu

Sunny Steel Enterprise Ltd.
tel:+86-21-33780199 fax:+86-21-61851035

╭ ═＝＝═ ==╮
|  Pipes, Fittings and Flanges.
╰-⊙═＝=═⊙---╯。。oо○ 


此博客中的热门博文

ASTM A213 T11 Seamless tube

ASTM A213 ,  ASTM A213 T11 ,  boiler tube ,  Heat exchanger tube ,  heat exchanger tubes ,  steel tubes ,  Tubing ASTM A213 T11 is the part of ASTM A213 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, Heat-Exchanger Tubes. These different requirements provide higher creep-rupture strength than normally achievable in similar grades without these different requirements. ASTM A213 T11 tubes shall be made by the seamless process and shall be either hot finished or cold finished, as specified. Grade TP347HFG shall be cold finished. Heat treatment shall be done separately and in addition to heating for hot forming. The ferritic alloy and ferritic stainless steels shall be reheated. On the other hand, austenitic stainless steel tubes shall be furnished in the heat-treated condition. Alternatively, immediately after hot forming, while the temperature of the tubes is not less than the minimum solution temperature, tubes may be individually quenched i
阅读全文

Pipe for cryogenic device

  Cryogenic piping refers to systems that are used in a wide range of industrial applications that require extremely low temperatures, generally around -300°F (150°C) or lower. Due to such low temperatures, cryogenic pipes face unique corrosion and deterioration challenges. Cyrogenic piping is also referred to as cold piping. Implement specifications such as ASME SA-333M, GB/T18984. The seamless steel tubes are applied for low temperature pressure vessel pipeline and low temperature heat exchanger pipeline. Usage Specification Steel Grade Seamless and Welding Nominal Pipe used for Low Temperature ASME SA -333M Gr.3, Gr.6, Gr.8 and so on Seamless Steel Pipe used for Low Temperature Pipeline GB/T18984 16MnDG, 06Ni3MoDG, 06Ni9MoDG and so on ASTM A333 (ASME S/A-333) Pipe grades permit low temperature service.  Mechanical requiremnts of ASTM A333 alloy pipe Grade Tensile Strength (MPa） Yield Point (MPa) Elongation (%) Y X Grade 3 ≥450 ≥240 ≥30 ≥20 Grade 6 ≥415 ≥240 ≥30 ≥16.5 Grade 8 ≥690 ≥5
阅读全文

Ceramic Lining Pipe and Elbow

Ceramic Lining Pipe and Elbow have very uniform coating of specially formulated ceramic material that is affixed to the inner of the pipe and gives a very smooth surface. Ceramics with very low friction factor at low impingement angles decreases the abrasion of materials maximally. Its low density makes it easy to carry and install. Furthermore, its diamond-like hardness, fine grain structure and superior mechanical strength are the unique features that make it a wide range of demanding applications, such as coal preparation, power generation, iron and steelmaking, cement, asphalt, dredging, mining and mineral processing, oil and gas drilling. Metals have good ductility but poor resistance to abrasion - which means that abrasion prevention is required when metal pipes are used in high-temperature fluid catalyst service. On the other hand, ceramics possess great hardness and abrasion resistance, but they are brittle. Metal Ceramic double pipe is a hybrid pipe using metal as an outer pip
阅读全文