Ceramic Lined Reducer Pipe with flange

Reducer pipe, Ceramic Lined Reducer Pipe with flange
Ceramic Lined Reducer Pipe is integrally fired ceramic tube , with a special molded ceramic filler pouring inside the pipe reducer assembled . Adjustable ceramic tube ceramic lined pipe affixed to the alumina content of not less than 95 %. 200T dry pressure forming , sintering temperature up to 1670 ℃. Has a strong high-pressure high-temperature capabilities !

Performance advantages
Abrasion
Ceramic layer ceramic lined pipe reducer Al2O3 content greater than 95% , micro-hardness HV1000-1500, which has a high abrasion resistance, wear resistance than ten times higher than carbon steel after quenching , superior tungsten carbide drill .

Corrosion
Ceramic materials are neutral , chemically stable , has excellent corrosion resistance and acid resistance , resistant to various inorganic acids, organic acids , organic solvents , and its degree of corrosion of stainless steel is more than ten times .

Temperature
Temperature above 2000 ℃, long-term work in the range of -50 ℃ ~ 900 ℃.

Easy welding
Ceramic adjustable tube can be welded , flanged , flexible connectors and other fast way links , very easy to install .

Clean and easy maintenance
Smooth wall, can prevent scaling , fouling, self-cleaning function. Tightness .

此博客中的热门博文

ASTM A335 P9 Alloy Steel Pipes

ASTM A335 P9 Alloy Steel Pipes alloy steel , Alloy steel pipe , ASTM A335 , ASTM A335 p9 , Steel pipe , steel pipes ASTM A335 P9 is the part of ASTM A335, The pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements. Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested. Material & Manufacture Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below. Heat Treatment A / N+T N+T / Q+T N+T ...

阅读全文

ASTM A335 P5 Alloy Seamless Steel Pipes

ASTM A335 P5 Alloy Seamless Steel Pipes ASTM A335 , ASTM A335 P5 , ASTM A335 P5 alloy pipe , seamless steel pipes , steel pipes Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested. Material & Manufacture Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below. Heat Treatment A / N+T N+T / Q+T N+T Mechanical Tests Specified Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots...