跳至主要内容

Ceramic Lining Pipe and Elbow

Ceramic Lining Pipe and Elbow have very uniform coating of specially formulated ceramic material that is affixed to the inner of the pipe and gives a very smooth surface. Ceramics with very low friction factor at low impingement angles decreases the abrasion of materials maximally. Its low density makes it easy to carry and install. Furthermore, its diamond-like hardness, fine grain structure and superior mechanical strength are the unique features that make it a wide range of demanding applications, such as coal preparation, power generation, iron and steelmaking, cement, asphalt, dredging, mining and mineral processing, oil and gas drilling.

Metals have good ductility but poor resistance to abrasion - which means that abrasion prevention is required when metal pipes are used in high-temperature fluid catalyst service. On the other hand, ceramics possess great hardness and abrasion resistance, but they are brittle. Metal Ceramic double pipe is a hybrid pipe using metal as an outer pipe and a ceramic material for inner pipe segments, applied together to utilize the two materials' advantages. Hence excellent wear-resistance and good corrosion resistance of the ceramics and high strength and toughness of metal can be well combined to get a comprehensive advantage of wear-resistance, corrosion-resistance and anti-scaling. They are suitable for applications in heavy wear working conditions.

Ceramics are among the hardest materials available and provide ultimate wear resistance in piping. In high wear applications, ceramic lined pipes have been demonstrated to be cost-effective by increasing service life and reducing maintenance costs. Sunny Steel supply ceramic lined abrasion resistant steel pipes to your custom dimensions and budget. Our ceramic linings are the highest quality materials available to ensure that we provide the most cost-effective solutions for our clients.

The Ceramic Tiles could protect Industrial Components against abrasion, impact wear and high temperature of above 1000°C. Standard Flat Tiles of Square & Rectangular Shape having thickness of 6 to 50 mm, with or without central hole are available.

Materials: seamless mild steel pipe plus 95% alumina ceramics for liner

Designed pressure: >= 0.35Mpa
Normal operation velocity: 20-35m/s
Normal operation temperature: -50-800
Running medium: mixture of air and powder
Size of the pipe: the inner diameter is between 1 to 120 or even lager


Industries Served:
•  Power Industry (Coal fired & Biomass)
•  Coal Mine and Preparation Plants
•  Cement & Asphalt Processing
•  Pulp & Paper Mills
•  Water & Waste Water Treatment
•  Mineral Processing
•  Steel Industry
标签：

此博客中的热门博文

ASTM A213 T11 Seamless tube

ASTM A213 ,  ASTM A213 T11 ,  boiler tube ,  Heat exchanger tube ,  heat exchanger tubes ,  steel tubes ,  Tubing ASTM A213 T11 is the part of ASTM A213 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, Heat-Exchanger Tubes. These different requirements provide higher creep-rupture strength than normally achievable in similar grades without these different requirements. ASTM A213 T11 tubes shall be made by the seamless process and shall be either hot finished or cold finished, as specified. Grade TP347HFG shall be cold finished. Heat treatment shall be done separately and in addition to heating for hot forming. The ferritic alloy and ferritic stainless steels shall be reheated. On the other hand, austenitic stainless steel tubes shall be furnished in the heat-treated condition. Alternatively, immediately after hot forming, while the temperature of the tubes is not less than the minimum solution temperature, tubes may be individually quenched i
阅读全文

Pipe for cryogenic device

  Cryogenic piping refers to systems that are used in a wide range of industrial applications that require extremely low temperatures, generally around -300°F (150°C) or lower. Due to such low temperatures, cryogenic pipes face unique corrosion and deterioration challenges. Cyrogenic piping is also referred to as cold piping. Implement specifications such as ASME SA-333M, GB/T18984. The seamless steel tubes are applied for low temperature pressure vessel pipeline and low temperature heat exchanger pipeline. Usage Specification Steel Grade Seamless and Welding Nominal Pipe used for Low Temperature ASME SA -333M Gr.3, Gr.6, Gr.8 and so on Seamless Steel Pipe used for Low Temperature Pipeline GB/T18984 16MnDG, 06Ni3MoDG, 06Ni9MoDG and so on ASTM A333 (ASME S/A-333) Pipe grades permit low temperature service.  Mechanical requiremnts of ASTM A333 alloy pipe Grade Tensile Strength (MPa） Yield Point (MPa) Elongation (%) Y X Grade 3 ≥450 ≥240 ≥30 ≥20 Grade 6 ≥415 ≥240 ≥30 ≥16.5 Grade 8 ≥690 ≥5
阅读全文