跳至主要内容

Stainless Steel Seamless Pipes / Tubes

Stainless Steel Seamless Pipes, Stainless Steel Seamless Tubes, Stainless Seamless Pipes, Stainless Seamless tubes

Product Name
Executive
Dimension
Steel Code / Steel Grade
Seamless Austenitic Stainless Steel Pipes
ASTM A312, A312M
ASME SA312 / SA312M
OD: 1/4"~20"
WT: SCH5S~SCH80S
TP304, TP304L, TP304H, TP310, TP310S, TP316, TP316L, TP316Ti, TP317, TP317L, TP321, TP321H, TP347, TP347H
Seamless Austenitic Stainless Steel Tubing for General Service
ASTM A269
ASME SA269
OD: 6.0~50.8mm
WT: 0.8~10.0mm
TP304, TP304L, TP304H, TP310, TP310S, TP316, TP316L, TP316Ti, TP317, TP317L, TP321, TP321H, TP347, TP347H
Seamless Austenitic Alloy-Steel Boiler, Super Heater and Heat-Exchanger Tubes
ASTM A213 / A213M
ASME SA213 / SA213M
OD: 6.0~50.8mm
WT: 0.8~10.0mm
TP304, TP304L, TP304H, TP310, TP310S, TP316, TP316L, TP316Ti, TP317, TP317L, TP321, TP321H, TP347, TP347H
Seamless Duplex Stainless Steel Tubing for General Service
ASTM A789 / A789M
OD: 19.0~60.5mm
WT: 1.2~5.0mm
S31803, S32205, S32750
Seamless Duplex Stainless Steel Pipes
ASTM A790 / A790M
OD: 3/4"~10"
WT: SCH5S~SCH80S
S31803, S32205, S32750
Seamless Stainless Steel Mechanical Tubing
ASTM A511
OD: 6.0~50.8mm
WT: 0.8~10.0mm
MT304, MT304L, MT304H, MT310, MT310S, MT316, MT316L, MT317, MT317L, MT321, MT321H, MT347
Seamless Stainless Steel Tubes for Pressure Purposes
EN 10216
DIN 17456, 17458
OD: 6.0~530.0mm
WT: 0.8~34.0mm
1.4301, 1.4307, 1.4541, 1.4401, 1.4404, 1.4571, 1.4878, 1.4432, 1.4462
Any questions, that will be much appreciated! Thanks

Yours Sum Xu

Sunny Steel Enterprise Ltd.
tel:+86-21-33780199 fax:+86-21-61851035

╭ ═＝＝═ ==╮
|  Pipes, Fittings and Flanges.
╰-⊙═＝=═⊙---╯。。oо○ 

标签：

此博客中的热门博文

ASTM A335 P9 Alloy Steel Pipes

ASTM A335 P9 Alloy Steel Pipes alloy steel ,  Alloy steel pipe ,  ASTM A335 ,  ASTM A335 p9 ,  Steel pipe ,  steel pipes ASTM A335 P9 is the part of ASTM A335, The pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements. Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested. Material & Manufacture Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below. Heat Treatment A / N+T N+T / Q+T N+T ...
阅读全文

ASTM A335 P5 Alloy Seamless Steel Pipes

ASTM A335 P5 Alloy Seamless Steel Pipes ASTM A335 ,  ASTM A335 P5 ,  ASTM A335 P5 alloy pipe ,  seamless steel pipes ,  steel pipes Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested. Material & Manufacture Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below. Heat Treatment A / N+T N+T / Q+T N+T Mechanical Tests Specified Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots...
阅读全文

Silicon carbide alloy ceramic wear tube

Reaction bonded SiC is made by infiltrating compacts made of mixtures of SiC and carbon with liquid silicon. The silicon reacts with the carbon forming more SiC which bonds the initial SiC particles. Silicon carbide is formed in two ways, reaction bonding and sintering. Each forming method greatly affects the end microstructure. Reaction bonded SiC is made by infiltrating compacts made of mixtures of SiC and carbon with liquid silicon. The silicon reacts with the carbon forming more SiC which bonds the initial SiC particles. Sintered SiC is produced from pure SiC powder with non-oxide sintering aids. Conventional ceramic forming processes are used and the material is sintered in an inert atmosphere at temperatures up to 2000ºC or higher. Both forms of silicon carbide (SiC) are highly wear resistant with good mechanical properties, including high temperature strength and thermal shock resistance. Our engineers are always available to best advise you on the strengths and weaknesses of ea...
阅读全文