跳至主要内容

Rare earth alloy bimetal pipe

Rare earth alloy bimetal pipe is in the serious abrasion of the parts, such as elbows, different diameter pipe, water inlet and the overall model casting, and then the mechanical processing method, especially on the outer side of the elbow wear is particularly striking parts of, external diameter of the circle method to carry on the design change, the wear serious parts of locally thickened, but also according to the requirements of the various produce all kinds of irregular switch fittings to meet the design requirements, the straight tube is by centrifugal casting. Two is a rare earth wear-resistant alloy containing Ni, Mo, W, V, Cr, Cu and other alloy elements, which not only has a high hardness, but also has a certain mechanical properties, has good welding performance at room temperature, and has the possibility of cutting and opening the hole, but also has a certain anti corrosion performance.
In the actual use of the process, whether it is in the steel slag water pipe or in coal preparation plant of coal washing pipeline, such as the use of have made good effect. Compared with the high manganese steel materials in the same conditions, the unit wear is about one-fifth of the high manganese steel, the service life is 4-5 times that of the high manganese steel, pipe and branch pipe and seamless pipe supporting the use, installation and maintenance more convenient.
标签：

此博客中的热门博文

ASTM A335 P9 Alloy Steel Pipes

ASTM A335 P9 Alloy Steel Pipes alloy steel ,  Alloy steel pipe ,  ASTM A335 ,  ASTM A335 p9 ,  Steel pipe ,  steel pipes ASTM A335 P9 is the part of ASTM A335, The pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements. Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested. Material & Manufacture Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below. Heat Treatment A / N+T N+T / Q+T N+T ...
阅读全文

Silicon carbide alloy ceramic wear tube

Reaction bonded SiC is made by infiltrating compacts made of mixtures of SiC and carbon with liquid silicon. The silicon reacts with the carbon forming more SiC which bonds the initial SiC particles. Silicon carbide is formed in two ways, reaction bonding and sintering. Each forming method greatly affects the end microstructure. Reaction bonded SiC is made by infiltrating compacts made of mixtures of SiC and carbon with liquid silicon. The silicon reacts with the carbon forming more SiC which bonds the initial SiC particles. Sintered SiC is produced from pure SiC powder with non-oxide sintering aids. Conventional ceramic forming processes are used and the material is sintered in an inert atmosphere at temperatures up to 2000ºC or higher. Both forms of silicon carbide (SiC) are highly wear resistant with good mechanical properties, including high temperature strength and thermal shock resistance. Our engineers are always available to best advise you on the strengths and weaknesses of ea...
阅读全文

ASME SA333 Gr.6 Seamless Steel Pipe

ASME SA333 Gr.6 Seamless Steel Pipe alloy steel ,  ASME SA333 Gr.6 ,  astm a333 ,  ASTM A333 Gr.6 ,  ASTM A333 Grade 6 ,  gr 6 ,  seamless steel pipe ASTM A333 Standard covers seamless and welded steel pipe for low temperature service. The Grade 6 steel involved is similar to AISI 4032 low alloy steel. ASTM A333 Grade 6 pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation. Seamless and Welded Steel Pipe size for Low-Temperature Service: Outer Dimensions: 19.05mm-114.3mm Wall Thickness:2.0mm-14 mm Length: max 16000mm Application: Seamless and Welded Steel Pipe for Low-Temperature Service. Steel grade: ASTM A333 Grade 6 Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test Surface and Dimension Test,No-destructive Test, Hydrostatic Test. ASTM A333 Gr. 6 Chemical Compositions(...
阅读全文