跳至主要内容

Rare Earth Wear Resistant alloy Elbow

The late eighty`s, American technology of rare eath wear resistant steel was introduced into our country. The relevant experts researched and made many experiments. The rare-earth wear-resistant steel had occupied the main position.Rare-earth wear-resistant steel is based on 40 steel. Cr, Ni, Si, Mo, Mn, Re elements are mixed in 40 steel forming low alloy steel which carbon content is 0.35~ 0.45%.
Experienced long-term production making and many failures, we summed up a reasonable science and new experience.A certain amount of rare earth element is added into steel can improve the quality of alloy steel and can fining grains also can form a protective film on surface. A certain amount of Mo is added, the alloy under certain temperature and certain antioxidant effect, increase the service life.A certain amount of boron carbide is added, hardness can be controlled in the range HRC45 ~ 65. At the same time solve the contradictions between the hardness and weldability of wear resistant steel. Rare-earth wear-resistant steel has high wear resistance, it is superior to other wear-resistant materials.
Our company developed a new type high strength rare earth alloy series products. The material overcomes cold, heat, crack, fragile, deformation etc problems. It is high strength, good toughness, corrosion resistance, good welding performance, long service life. It`s service life is three times of high manganese steel. Bend pipe and branch pipe can be mating used with seamless steel tube.It is convenient to install and maintain.
Main performance:
  • Designation:ZG40CrNiMoMnSiRe
  • Hardness:HRC≥40
  • Impact toughness:≥14J/cm2
  • Strength of extension:≥700MPa
Application:
High strength low alloy rare earth heat-resistant, wear-resistant steel pipe suitable for coal powder and ash slag discharge pipe in the boiler system of thermal power plant.

此博客中的热门博文

ASME SA210C stocks

ASME  SA 210 Grade C  Tubes  

Bi Metal Clad bend

Bimetal Clad Pipe Bend are cast with mold vanishing vacuum suction casting cladding process. Outer of straight pipe is common steel pipe, cladding realized by forming high chromium lining via centrifugal forming technique. 1. Manufacturing Process of Bimetal Clad Pipe and Bend: Bimetal Clad Pipe and Bend are cast with mold vanishing vacuum suction casting cladding process. Outer of straight pipe is common steel pipe, cladding realized by forming high chromium lining via centrifugal forming technique. Outer of bend uses hot-bending bend and lining is cast with high-chromium cast iron. Bends and other profile sections can be cladded in whole and this process has changed the traditional practice to fabricate bend and other profile sections by drawing polyline without changing flow pattern of material inside piping,greatly reducing conveyance resistance of material. 2. Advantages Compared with Traditional Wear Resistant Alloy Cast Iron, Alloy Cast Steel, General Clad Steel Pipe and Cast St...

UHMWPE wear pipe

Ultra-high molecular weight polyethylene (UHMWPE) is a new kind of engineering thermoplastics with more than 3 million viscosity-average molecular weight. Ultra-high molecular weight polyethylene pipe has superior performance over conventional HDPE pipe such as very high wear resistance, impact resistance, excellent resistance to internal pressure strength, resistance to environmental stress cracking, intrinsically self-lubricating, anti-adhesion, low temperature resistance and excellent chemical resistance. Ultra-high molecular weight polyethylene (UHMW-PE) is the role of special catalyst, polymerization of viscosity-average molecular weight greater than 2.5 million engineering thermoplastics . Ultra high molecular weight polyethylene pipe with high wear resistance, friction coefficient is extremely small , impact resistance , corrosion resistance, non-scaling , the excellent anti- pressure strength , resistance to environmental stress cracking resistance, good self-lubricating , anti...