跳至主要内容

Alumina ceramic sleeve lined pipe elbow

The Alumina ceramic sleeve lined pipe elbow as a whole part, and then assemble it into the steel pipe with our high-strength-temperature-resistant epoxy adhesive.
Alumina ceramic sleeve lined pipe elbow
ceramic sleeve lined elbow 45d
ceramic sleeve lined elbow 45d
ceramic sleeve lined elbow 90d
ceramic sleeve lined elbow 90d

The pipe consists of three layers: smooth ceramic lining (compact corundum), ceramic and metal transition layer and the outer steel pipe.

Wear resistant alumina ceramic rings welded in steel pipes

These Ceramic Tubes are identical to the ones we use in our production, so high quality, consistency, and uniformity are assured.

The combination of high rigidity of ceramic and high elasticity of steel gives the pipe unmatchable features as an abrasion resistant, heat resistant and corrosion resistant material for use in the fields of power generation, metallurgy, mining, and chemical industry etc.. It has many advantages over steel pipes, cast stone pipes, and steel-plastic compound pipes.

Wear-resistant ceramic ring weld
Wear-resistant ceramic ring data

High alumina ceramic linings are curved, piping and elbows are reliable, maintain close manufacturing tolerances, and are ready to install, thus facilitating quick replacement and free operation for long lasting trouble. Ceramic liner equipment, including ceramic wire tube, ceramic liner elbow, ceramic liner cone, ceramic turret, ceramic-lined hydrocyclone, ceramic liner, ceramic lined valves to help users obtain the maximum efficiency of the equipment.

Wear abrasion stainless ceramic pipes with below advantages:

  1. Better purity for inside and outside pipe materials;
  2. More abrasive;
  3. Higher corrosion resistance;
  4. Stronger impacting resistance;
  5. Better high temperature resistance
  6. Smaller flatness of inside pipe(ceramic flatness≤0.5mm)

In addition, the flatness of ceramic casing is also an important factor affecting the size of lithium battery materials.We did a lot of analysis and improved our manufacturing techniques to solve both of these problems.Now it can help lithium battery delivery systems better solve these problems, with better material purity, longer service life and better economic benefits.

标签：

此博客中的热门博文

ASTM A335 P9 Alloy Steel Pipes

ASTM A335 P9 Alloy Steel Pipes alloy steel ,  Alloy steel pipe ,  ASTM A335 ,  ASTM A335 p9 ,  Steel pipe ,  steel pipes ASTM A335 P9 is the part of ASTM A335, The pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements. Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested. Material & Manufacture Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below. Heat Treatment A / N+T N+T / Q+T N+T ...
阅读全文

ASTM A335 P5 Alloy Seamless Steel Pipes

ASTM A335 P5 Alloy Seamless Steel Pipes ASTM A335 ,  ASTM A335 P5 ,  ASTM A335 P5 alloy pipe ,  seamless steel pipes ,  steel pipes Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested. Material & Manufacture Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below. Heat Treatment A / N+T N+T / Q+T N+T Mechanical Tests Specified Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots...
阅读全文

ASME SA333 Gr.6 Seamless Steel Pipe

ASME SA333 Gr.6 Seamless Steel Pipe alloy steel ,  ASME SA333 Gr.6 ,  astm a333 ,  ASTM A333 Gr.6 ,  ASTM A333 Grade 6 ,  gr 6 ,  seamless steel pipe ASTM A333 Standard covers seamless and welded steel pipe for low temperature service. The Grade 6 steel involved is similar to AISI 4032 low alloy steel. ASTM A333 Grade 6 pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation. Seamless and Welded Steel Pipe size for Low-Temperature Service: Outer Dimensions: 19.05mm-114.3mm Wall Thickness:2.0mm-14 mm Length: max 16000mm Application: Seamless and Welded Steel Pipe for Low-Temperature Service. Steel grade: ASTM A333 Grade 6 Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test Surface and Dimension Test,No-destructive Test, Hydrostatic Test. ASTM A333 Gr. 6 Chemical Compositions(...
阅读全文