跳至主要内容

Mechanical Engineering Pipe

 


Pipes used for petroleum mechanical processing are the necessary materials for oil exploration equipment, well-drilling equipment, machinery oil recovery equipment, facilities and accessories for oil drilling & recovery as well as integrated equipment of petroleum & natural gas collection and transmission.


Our manufactory has successfully developed petroleum mechanical processing pipe with steel grade 55ksi-135ksi on its own, which has both good strength and good tenacity, uniform performance of whole wall thickness and excellent processing performance.

Production Range

  • OD: 42mm-760mm
  • WT: 4mm-120mm

Steel Grade and Properties

Applicable specification: API 5CT, ASTM A519, NACE MR0175, GB/T 8162 or user’s agreement.

Steel GradeProperties of Steel Pipe
YieldTensileElongationHardnessAbsorbed-energy
（MPa）（Mpa）（%）(HRC)(AKV2/J)
55ksi379-552≥ 655≥16—Implement  in accordance with API 5CT Specification
80ksi552-655≥ 655≥ 16≤ 23.0HRC
95ksi655-758≥ 724≥ 15≤ 25.4HRC
110ksi758-965≥ 862≥ 1328-34 HRC
125ksi862-1034≥ 931≥ 1228-36 HRC
135ksi931-1068≥ 931≥ 1228-38 HRC

Remarks:

  • Property requirements for steel grade of 4130, 4140, 42CrMo shall be negotiated by both parties.
  • Supply steel pipe with the relevant properties required by the clients.

Note: Steel pipe can be developed and produced to meet the users’ personalized requirements according to their demands.

Application Fields

Petroleum mechanical processing pipe can be applied to machining accessories for well drilling and well completion tools, power drilling tools used under the well，suspension sealing & isolation systems，wellhead system devices and other oil-field service products.



标签：

此博客中的热门博文

High Chromium Cast Iron Bimetal Cladding Pipe

High Chromium Cast Iron Bimetal Cladding Pipe, High Chromium Cast Iron pipe, Bimetal Cladding Pipe We are manufacturer of High Chromium Cast Iron Bimetal Cladding Pipe and supply high quality High Chromium Cast Iron Bimetal Cladding Pipe in both large and small quantities worldwide and offer you the best prices in the market. These Steel-high chromium cast iron bimetal cladding pipe is a new type of abrasion proof piping developed by our company. Outer of straight pipe is common steel pepe, cladding realized by forming high chromium lining via centrifugal forming technique. Outer of bend uses hot-bending bend and lining is cast with high-chromium cast iron. Compared with traditional wear-resistant alloy cast iron, wear-resistant alloy cast steel, general cladding steel pipe and cast stone pipe. 1. Good wear-resistance, giving full play to wear-resistance of high chromium cast iron. 2. Withstanding high pressure: It can be used for any pressure rating. Close bonding of outer and lining ...
阅读全文

15CrMoG seampless PMI test

The range of 15CrMoG pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice. For high-pressure boiler (working pressure 9.8MPa or more generally, the working temperature between 450℃-650℃) of heating surface tubes, header, economizer, superheater, reheater and so on. 15CrMoG Seamless Tubes for High Pressure Boiler description Standard: GB 5310 Relative grades: 20G, 20MnG, 15MoG, 15CrMoG, 12Cr2MoG, 12Cr1MoVG. After consultation, can also supply other grades of steel. 15CrMoG Alloy steel pipe is a seamless steel tube, its performance is much higher than the general seamless steel pipe, because the inside of this tube contains CR more, its alloy steel tube high temperature, low-temperature, corrosion resistance of other seamless steel tubes, so the alloy tube in the petroleum, chemical, electric power, boiler and other industries are more widely used. 15CrMoG Alloy steel pipe is a seamless steel tube, its performance is...
阅读全文

ASME SA333 Gr.6 Seamless Steel Pipe

ASME SA333 Gr.6 Seamless Steel Pipe alloy steel ,  ASME SA333 Gr.6 ,  astm a333 ,  ASTM A333 Gr.6 ,  ASTM A333 Grade 6 ,  gr 6 ,  seamless steel pipe ASTM A333 Standard covers seamless and welded steel pipe for low temperature service. The Grade 6 steel involved is similar to AISI 4032 low alloy steel. ASTM A333 Grade 6 pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation. Seamless and Welded Steel Pipe size for Low-Temperature Service: Outer Dimensions: 19.05mm-114.3mm Wall Thickness:2.0mm-14 mm Length: max 16000mm Application: Seamless and Welded Steel Pipe for Low-Temperature Service. Steel grade: ASTM A333 Grade 6 Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test Surface and Dimension Test,No-destructive Test, Hydrostatic Test. ASTM A333 Gr. 6 Chemical Compositions(...
阅读全文