跳至主要内容

Pipe for Boiler products

 


Implement the relevant specifications such as GB3087, GB/T 5310, DIN17175, EN10216, ASME SA-106M, ASME SA192M, ASME SA209M, ASME SA -210M, ASME SA -213M, ASME SA -335M, JIS G 3456, JIS G 3461, JIS G 3462 and so on. Products will be used for the heating surface of high temperature boiler, economizer, header, superheater, reheater and for petrochemical industry etc.




UsageSpecificationSteel Grade
Seamless Steel Tube for High Pressure BoilerGB/T 531020G、25MnG、15MoG、15CrMoG、12Cr1MoVG、
12Cr2MoG、15Ni1MnMoNbCu、10Cr9Mo1VNbN
High Temperature Seamless Carbon Steel Nominal PipeASME SA-106/B、C
SA-106M
Seamless Carbon Steel Boil Pipe used for High PressureASME SA-192/A192
SA-192M
Seamless Carbon Molybdenum Alloy Pipe used for Boiler and SuperheaterASME SA-209/T1、T1a、T1b
SA-209M
Seamless Medium Carbon Steel Tube & Pipe used for Boiler and SuperheaterASME SA-210/A-1、C
SA -210M
Seamless Ferrite and Austenite Alloy Steel Pipe used for Boiler, Superheater and Heat ExchangerASME SA-213/T2、T5、T11、T12、T22、T91
SA-213M
Seamless Ferrite Alloy Nominal Steel Pipe applied for High TemperatureASME SA-335/P2、P5、P11、P12、P22、P36、P9、P91、P92
SA-335M
Seamless Steel Pipe made by Heat-resistant SteelDIN 17175St35.8、St45.8、15Mo3、13CrMo44、10CrMo910
Seamless Steel Pipe forEN 10216P195GH、P235GH、P265GH、13CrMo4-5、10CrMo9-10、15NiCuMoNb5-6-4、X10CrMoVNb9-1
Pressure Application

Products can be ordered in accordance with the client’s requirements.

标签：

此博客中的热门博文

ASME SA210C stocks

ASME  SA 210 Grade C  Tubes  
阅读全文

Bi Metal Clad bend

Bimetal Clad Pipe Bend are cast with mold vanishing vacuum suction casting cladding process. Outer of straight pipe is common steel pipe, cladding realized by forming high chromium lining via centrifugal forming technique. 1. Manufacturing Process of Bimetal Clad Pipe and Bend: Bimetal Clad Pipe and Bend are cast with mold vanishing vacuum suction casting cladding process. Outer of straight pipe is common steel pipe, cladding realized by forming high chromium lining via centrifugal forming technique. Outer of bend uses hot-bending bend and lining is cast with high-chromium cast iron. Bends and other profile sections can be cladded in whole and this process has changed the traditional practice to fabricate bend and other profile sections by drawing polyline without changing flow pattern of material inside piping,greatly reducing conveyance resistance of material. 2. Advantages Compared with Traditional Wear Resistant Alloy Cast Iron, Alloy Cast Steel, General Clad Steel Pipe and Cast St...
阅读全文

ASTM A335 P5 Alloy Seamless Steel Pipes

ASTM A335 P5 Alloy Seamless Steel Pipes ASTM A335 ,  ASTM A335 P5 ,  ASTM A335 P5 alloy pipe ,  seamless steel pipes ,  steel pipes Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested. Material & Manufacture Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below. Heat Treatment A / N+T N+T / Q+T N+T Mechanical Tests Specified Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots...
阅读全文